natrajs
09-01 06:10 PM
i was on h4 visa and recently as i turned 21 i am no more dependent on my dad who is on h1 visa . i tranfered my status to f1 .But my dad applied his 1-485 recently along with my application for i-485 and he consult the lawyer too and lawyer told as i am not the main visa holder like if i was on h1 and i transferred to f1 and then apply for i-485 then my application can get rejected ; but not now as i was not the main applicant but was dependent of my father.
i dont trust everything wat lawyers say.so can anybody help me out with this issue.
To my understainding if your dad applied your AOS application before you turned to 21 then you are ok.
Consult another attorney
i dont trust everything wat lawyers say.so can anybody help me out with this issue.
To my understainding if your dad applied your AOS application before you turned to 21 then you are ok.
Consult another attorney
wallpaper Gambling Heart Tattoo
saji007
05-03 12:53 PM
I had both PERM and I-140 copy. I think I-140 should be enough. Any way check with the lawyer, of the new company before resigning from the current one.
You should get 3 years, in a normal case, depends on the reviewing officer. If not you can apply for H1-Extn based on approved I-140 from prev employer ( Current Employer should not revoke it, I think) . I changed twice after I-140 and both times i got 3 years.
You should get 3 years, in a normal case, depends on the reviewing officer. If not you can apply for H1-Extn based on approved I-140 from prev employer ( Current Employer should not revoke it, I think) . I changed twice after I-140 and both times i got 3 years.
gcpool
10-06 01:27 PM
If your I-485 EAD comes through you have to use that and not the F1 EAD.
My wife has both OPT EAD (on F1) and 485 EAD. Both are valid. The OPT EAD was applied before july since we did not know abt the july thing earlier....
Now my question is which one should she use for employment..Also if either can be used then OPT ead is preferred since on OPT you do not have to pay Social Security and Medicare Taxes
My wife has both OPT EAD (on F1) and 485 EAD. Both are valid. The OPT EAD was applied before july since we did not know abt the july thing earlier....
Now my question is which one should she use for employment..Also if either can be used then OPT ead is preferred since on OPT you do not have to pay Social Security and Medicare Taxes
2011 heart tattoos for men on chest
snathan
02-22 11:41 AM
I am trying to port from EB3-EB2 from the same employer.
Prior to joining the employer, I had MS+2 years of experience. However, the lawyer applied in EB3. The job description read:
Required: BS+3
MS+1 also accepted
Experience in technologies A,B,C,D
I applied based on my MS+1 experience. Now the same company has another position with a very similar job description with a different title.
Required:MS+1
Experience in technologies A,B,C,D
Q1. Would this qualify for a EB2 position? Do I have to worry about the job descriptions being almost similar
Q2. The titles are different. But the EB2 position doesn't have "Senior" in the position title. Is there a need to worry?
Any replies are really appreciated.
Title alone will not make you to qualify for EB2. You need to worry about porting with the same employer as it might invite audit (most likely) and there are other consequences also to worry about.
Check with your HR - What category they are filing for the new job EB2/EB3
If EB2 ask them - Why did they file EB3 for you for the same position.
If EB3 - There is no point in porting.
Prior to joining the employer, I had MS+2 years of experience. However, the lawyer applied in EB3. The job description read:
Required: BS+3
MS+1 also accepted
Experience in technologies A,B,C,D
I applied based on my MS+1 experience. Now the same company has another position with a very similar job description with a different title.
Required:MS+1
Experience in technologies A,B,C,D
Q1. Would this qualify for a EB2 position? Do I have to worry about the job descriptions being almost similar
Q2. The titles are different. But the EB2 position doesn't have "Senior" in the position title. Is there a need to worry?
Any replies are really appreciated.
Title alone will not make you to qualify for EB2. You need to worry about porting with the same employer as it might invite audit (most likely) and there are other consequences also to worry about.
Check with your HR - What category they are filing for the new job EB2/EB3
If EB2 ask them - Why did they file EB3 for you for the same position.
If EB3 - There is no point in porting.
more...
BharatPremi
03-12 04:00 PM
I am in ROW, EB2 if they processed the interfiling, EB3 if not, with a PD of Dec 2002, and receipt date of 5 May 2007.
My application was filed with Nebraska Service center, they moved to Texas (with SRC* receipt number), they moved back to Nebraska in October 2007.
Even on EB3 my PD is now current.
When they passed 60 days late according to processing times I raised a service request. They claim that they have 45 days to respond. Their 45 days will be up on Thursday, and I still have no response.
So here is my plan...
On Thursday call again. Raise another service request?
Make an Info pass appointment ? - not sure IO could tell me more in person than over phone.
On Thursday go see Congressman's office.
Come May 2008 (one year since filing I485) if there is still no suitable reply to service request file WOM. Their lack of response to service request should annoy the judge hopefully.
When I last spoke with an IO she thought that the notice date on the transfer notice was the processing date to use (Oct 2007) not the receipt date on it (May 2007). I believe she is plain wrong, and she was silent when I asserted that I believed she was wrong, and that's why the original receipt date is kept on the transfer notice. If someone has a link to the USCIS rule on this it would be helpful.
Any comments please?
Mark,
Being ROW, I do not think your case might have been stuck in Name Check. But it could be the possibility. I would take one more infopas and ask IO regarding name check status. If case is still rotting in name check then fighting strategy would be different, I guess. As far as WOm is concerned, all stories what I have gone through on different immigration boards, most advise to wait for 2 years before thinking about WOM route.. I do not know how far that argument is valid..
My application was filed with Nebraska Service center, they moved to Texas (with SRC* receipt number), they moved back to Nebraska in October 2007.
Even on EB3 my PD is now current.
When they passed 60 days late according to processing times I raised a service request. They claim that they have 45 days to respond. Their 45 days will be up on Thursday, and I still have no response.
So here is my plan...
On Thursday call again. Raise another service request?
Make an Info pass appointment ? - not sure IO could tell me more in person than over phone.
On Thursday go see Congressman's office.
Come May 2008 (one year since filing I485) if there is still no suitable reply to service request file WOM. Their lack of response to service request should annoy the judge hopefully.
When I last spoke with an IO she thought that the notice date on the transfer notice was the processing date to use (Oct 2007) not the receipt date on it (May 2007). I believe she is plain wrong, and she was silent when I asserted that I believed she was wrong, and that's why the original receipt date is kept on the transfer notice. If someone has a link to the USCIS rule on this it would be helpful.
Any comments please?
Mark,
Being ROW, I do not think your case might have been stuck in Name Check. But it could be the possibility. I would take one more infopas and ask IO regarding name check status. If case is still rotting in name check then fighting strategy would be different, I guess. As far as WOm is concerned, all stories what I have gone through on different immigration boards, most advise to wait for 2 years before thinking about WOM route.. I do not know how far that argument is valid..
newuser
09-01 09:52 AM
Please see an attorney.
more...
ras
06-06 02:29 PM
Are there any specific links for complaining to these agencies?
2010 hot small heart tattoo ideas
aat0995
01-15 12:03 PM
Wow! That should save me a bunch. I smell immigrationvoice is getting another donation soon :).
Now what aranya said would be wrong right? I just want to confirm as quite a few employers follow this practice. As mine is a govt. agency if it is a law I assume they will follow it. But just wanted to confirm..
Thanks!!
Now what aranya said would be wrong right? I just want to confirm as quite a few employers follow this practice. As mine is a govt. agency if it is a law I assume they will follow it. But just wanted to confirm..
Thanks!!
more...
thepaew
02-09 01:41 PM
Hello Pappu,
I can write this. Please let me know the word count. When is the deadline?
BR
We have an opportunity for an op-ed to be published in a leading Indian media about the recent amendment that harm foreign workers.
Please send it to info at immigrationvoice.org urgently so that it can be published while the issue is hot and it complements our effort to oppose in the conference
I can write this. Please let me know the word count. When is the deadline?
BR
We have an opportunity for an op-ed to be published in a leading Indian media about the recent amendment that harm foreign workers.
Please send it to info at immigrationvoice.org urgently so that it can be published while the issue is hot and it complements our effort to oppose in the conference
hair images wallpaper heart tattoos
fatjoe
09-05 10:16 AM
Same here. All filed at NSC. Filed for EAD and AP on Aug 10th. Checks got cleared on Aug 24th. But did not get the reciept notice yet. Why is it taking so long a time to get the REceipt notices for EAD/AP, where my checks were cleared a couple of weeks ago.
Filed for 485 on July 18th, checks not cleared yet. Already my LC that was filed in July-2002 was denied due to the careless mistake of the attorney/employer. So, Keeping my fingers crossed.
BTW: Do, you know what # should I dial to contact USCIS to get info on I485/EAD/AP.
Thanks.
Filed for 485 on July 18th, checks not cleared yet. Already my LC that was filed in July-2002 was denied due to the careless mistake of the attorney/employer. So, Keeping my fingers crossed.
BTW: Do, you know what # should I dial to contact USCIS to get info on I485/EAD/AP.
Thanks.
more...
vallabhu
12-12 02:08 PM
Your wife might have a problem in leaving US with expired I94 , if the immigration officer who is collecting sees that I94 is expired she is subject to 10 year BAN unless she goes CANADA or MEXICO route where they don't collect I94's and to come back in she needs advance parole to be approved receipt may not help .
hot i love you heart tattoo. heart
ComicDom1
December 21st, 2007, 01:11 AM
First I want to say hello to everyone because I have not been on this site for a while. Second, I want to wish everyone a happy holiday season.
Recently, I have been taking a good hard look at the Olympus E-3. I came to Canon Digital in the early days of the 1D after shooting many different digital cameras including Olympus.
I was well pleased using my E-10, E100RS, E-20, and UZI but when I got the 1D in my hands it was as if a whole new world opened up for me again.
Like many others, I have been following the development of Olympus Camera's. Many of us switched to other brands because we grew tired of waiting for Olympus to produce a DSLR that might be able to compete with the offering from Nikon or Canon. The move to producing a full frame 4/3's sensor was interesting as well. When Olympus finally did release the E-1, it offered a great build including a splash proof body, and some very high quality glass. Unfortunately it lacked in a few area's and although interesting, unless you shot at lower ISO, it was not a camera for people who liked to shoot in low light and sporting events.
I realize, that not everyone has the same requirements for a camera. There are many users the E-1 body worked for. I finally picked one up after the prices fell to a very low point, and I could not resist the deal. I have found the image quality very good if you stay within the limits of the camera.
Finally the E-3 arrived in November and Olympus had made many upgrades in this body. I was very curious as to how competitive IS built in the body of the camera would work. I was also interested in the speed and tracking of the new auto focus system, and if Olympus had really improved on the noise levels of the camera at Higher ISOs. Although many in the Olympus SLR forum at DPR will claim that Noise is no problem at High ISO, my experiences with the camera told me different.
I do have to say, I found the E-3 very well built. The viewfinder is very bright. With the Grip attached, the E-3 felt very similar in my hands to my Canon 1D and 1DMKII.
One of the promises that Olympus made was that the 4/3 system was going to provide us with a smaller lighter Camera body with smaller lenses. While this might be true for some of their mid range cameras, it is certainly not true for the E-3 or E-1 with the grip attached. When sitting on the floor next to my 1D and 1DMKII bodies, I did not find much difference in their size. Lenses might be another story but yesterday, I compared the Olympus 35-100mm to the 70-200 2.8 IS lens and found that the Olympus lens was actually slightly heavier. Unfortunately Olympus has not produced any faster primes like the 85 1.8 of Canon. You really do not have good comparisons of lenses because most of what Olympus produces are variable zooms with the exception of a couple of lenses. Olympus also seems to advertise that they cover the focal length of lenses better than any other manufacturer. Since they include lenses from Sigma and Lecia/pany in this claim, I find difficulty in accepting that. Certainly if I have to consider a lens, I would prefer it was from the maker of my camera, but thats just a personal preference based on past experience.
I do have to give Kudo's to Olympus for improving both the frames per second, as well as the Auto Focus tracking and speed. I found the E-3 will track pretty well in a poorly lit gym. The E-3 also appears to write to the CF card pretty quickly. Why they included a slot for an XD card is beyond me. They would have been much better off to include a slot for the SD cards because of their high capacity.
I also qualified to be an Olympus Global Professional member. What this means is that I can get equipment to evaluate just like what CPS offers. Olympus goes one step further than Canon here because they will even loan you equipment while yours is in repair. So I had them send me a few items to try out. Some of the items I received was the EC-14 tele-converter, 150mm F 2.0, 50mm F 2.0 Macro, as well as a ring flash, and Fl-50R to evaluate. I think I need more time with the FL-50R and ring flash to know how I feel about them.
One of the reasons I wanted the 150mm F 2.0 (effective focal length of 300mm on the E-3) to test is because I wanted to see how it compared in weight and Image Quality to my 300mm 2.8L lens. I also wanted to know how well the E3 in body IS would work with it. Unfortunately I got side tracked because I noticed that my E-3 images contained quite a bit of noise from the images I shot and got consumed looking at that. I can tell you that the 150 and E-3 with grip combination felt very unbalanced in my hands compared to the Canon lens. The 150mm weights 3.4lbs but of course has the effective focal length of 300mm on the E-3 because of the sensor size. If we wanted to compare apples to apples, 300mm to 300mm or actual focal length, we would find that the Olympus 300mm weighs in at a hefty 7.2 lbs compared to Canon's 300mm 2.8 IS lens which is 5.6 lbs. Also the Olympus glass is much more expensive as well.
The problem here is that we are paying more for effective focal length just because the camera sensor is different. So in my view, we are paying more for less in the physical sense.
I mounted the 150mm on a monopod as well. Again compared to the 1D with the 300mm, even though the E-3 combination was lighter, it was not balanced as well and was more difficult for me to steady. I do attribute some of this with me being more experienced with the Canon Gear. There is another issue that concerned me here. I did not feel that the Tripod collar of the 150mm lens was made as heavy or as well as the Canon version.
I am currently going though several hundred exposures I have taken with various focal lengths of Olympus lenses. Since I felt my body has some issues because of noise, yesterday I returned it, the grip, and the 12-60 SWD lens to my vendor. I am waiting now for Olympus to send me another body to try out, so I can find out if it was me or the camera at fault. In the mean time, it seems that my findings are similiar to what Phil found in his DPR review of the new Sony that included the E-3 as well as the D300 and 40D.
In closing, I need to say that this all came about because not only was I interested in the development and capability of the E-3, there were also the noted problems of the 1DMKIII. At this point, I think my 1DMKII will still do nicely for sports. Since I pretty much own the Canon lenses I need, I am considering the 5D, but I want to also give the Olympus E-3 a fair chance, so I am going to wait to see if Olympus follows through on their promise to me.
I also am aware that there is a possibility that a 5D replacement may be announced at PMA next month. Of course I am basically interested in the best image quality, I do not know if I will wait for the replacement. Since the 5D has large photosites, I would think that the replacement would have more pixels so the image quality may be affected.
Thanks for Reading,
Jason
ComicDom1@aol.com
Recently, I have been taking a good hard look at the Olympus E-3. I came to Canon Digital in the early days of the 1D after shooting many different digital cameras including Olympus.
I was well pleased using my E-10, E100RS, E-20, and UZI but when I got the 1D in my hands it was as if a whole new world opened up for me again.
Like many others, I have been following the development of Olympus Camera's. Many of us switched to other brands because we grew tired of waiting for Olympus to produce a DSLR that might be able to compete with the offering from Nikon or Canon. The move to producing a full frame 4/3's sensor was interesting as well. When Olympus finally did release the E-1, it offered a great build including a splash proof body, and some very high quality glass. Unfortunately it lacked in a few area's and although interesting, unless you shot at lower ISO, it was not a camera for people who liked to shoot in low light and sporting events.
I realize, that not everyone has the same requirements for a camera. There are many users the E-1 body worked for. I finally picked one up after the prices fell to a very low point, and I could not resist the deal. I have found the image quality very good if you stay within the limits of the camera.
Finally the E-3 arrived in November and Olympus had made many upgrades in this body. I was very curious as to how competitive IS built in the body of the camera would work. I was also interested in the speed and tracking of the new auto focus system, and if Olympus had really improved on the noise levels of the camera at Higher ISOs. Although many in the Olympus SLR forum at DPR will claim that Noise is no problem at High ISO, my experiences with the camera told me different.
I do have to say, I found the E-3 very well built. The viewfinder is very bright. With the Grip attached, the E-3 felt very similar in my hands to my Canon 1D and 1DMKII.
One of the promises that Olympus made was that the 4/3 system was going to provide us with a smaller lighter Camera body with smaller lenses. While this might be true for some of their mid range cameras, it is certainly not true for the E-3 or E-1 with the grip attached. When sitting on the floor next to my 1D and 1DMKII bodies, I did not find much difference in their size. Lenses might be another story but yesterday, I compared the Olympus 35-100mm to the 70-200 2.8 IS lens and found that the Olympus lens was actually slightly heavier. Unfortunately Olympus has not produced any faster primes like the 85 1.8 of Canon. You really do not have good comparisons of lenses because most of what Olympus produces are variable zooms with the exception of a couple of lenses. Olympus also seems to advertise that they cover the focal length of lenses better than any other manufacturer. Since they include lenses from Sigma and Lecia/pany in this claim, I find difficulty in accepting that. Certainly if I have to consider a lens, I would prefer it was from the maker of my camera, but thats just a personal preference based on past experience.
I do have to give Kudo's to Olympus for improving both the frames per second, as well as the Auto Focus tracking and speed. I found the E-3 will track pretty well in a poorly lit gym. The E-3 also appears to write to the CF card pretty quickly. Why they included a slot for an XD card is beyond me. They would have been much better off to include a slot for the SD cards because of their high capacity.
I also qualified to be an Olympus Global Professional member. What this means is that I can get equipment to evaluate just like what CPS offers. Olympus goes one step further than Canon here because they will even loan you equipment while yours is in repair. So I had them send me a few items to try out. Some of the items I received was the EC-14 tele-converter, 150mm F 2.0, 50mm F 2.0 Macro, as well as a ring flash, and Fl-50R to evaluate. I think I need more time with the FL-50R and ring flash to know how I feel about them.
One of the reasons I wanted the 150mm F 2.0 (effective focal length of 300mm on the E-3) to test is because I wanted to see how it compared in weight and Image Quality to my 300mm 2.8L lens. I also wanted to know how well the E3 in body IS would work with it. Unfortunately I got side tracked because I noticed that my E-3 images contained quite a bit of noise from the images I shot and got consumed looking at that. I can tell you that the 150 and E-3 with grip combination felt very unbalanced in my hands compared to the Canon lens. The 150mm weights 3.4lbs but of course has the effective focal length of 300mm on the E-3 because of the sensor size. If we wanted to compare apples to apples, 300mm to 300mm or actual focal length, we would find that the Olympus 300mm weighs in at a hefty 7.2 lbs compared to Canon's 300mm 2.8 IS lens which is 5.6 lbs. Also the Olympus glass is much more expensive as well.
The problem here is that we are paying more for effective focal length just because the camera sensor is different. So in my view, we are paying more for less in the physical sense.
I mounted the 150mm on a monopod as well. Again compared to the 1D with the 300mm, even though the E-3 combination was lighter, it was not balanced as well and was more difficult for me to steady. I do attribute some of this with me being more experienced with the Canon Gear. There is another issue that concerned me here. I did not feel that the Tripod collar of the 150mm lens was made as heavy or as well as the Canon version.
I am currently going though several hundred exposures I have taken with various focal lengths of Olympus lenses. Since I felt my body has some issues because of noise, yesterday I returned it, the grip, and the 12-60 SWD lens to my vendor. I am waiting now for Olympus to send me another body to try out, so I can find out if it was me or the camera at fault. In the mean time, it seems that my findings are similiar to what Phil found in his DPR review of the new Sony that included the E-3 as well as the D300 and 40D.
In closing, I need to say that this all came about because not only was I interested in the development and capability of the E-3, there were also the noted problems of the 1DMKIII. At this point, I think my 1DMKII will still do nicely for sports. Since I pretty much own the Canon lenses I need, I am considering the 5D, but I want to also give the Olympus E-3 a fair chance, so I am going to wait to see if Olympus follows through on their promise to me.
I also am aware that there is a possibility that a 5D replacement may be announced at PMA next month. Of course I am basically interested in the best image quality, I do not know if I will wait for the replacement. Since the 5D has large photosites, I would think that the replacement would have more pixels so the image quality may be affected.
Thanks for Reading,
Jason
ComicDom1@aol.com
more...
house heart tattoos for men on chest
morpis
06-25 12:34 PM
Hello all,
I am not able to get my passport renewed. Indian consulate in Houston said that it will take atleast 4 weeks to get a passport.
Pl help. Can I go ahead and apply for my 485?
Also, would you know anything about copies of affidavits?
Pl reply. I am in serious bind.
Thanks.
I am not able to get my passport renewed. Indian consulate in Houston said that it will take atleast 4 weeks to get a passport.
Pl help. Can I go ahead and apply for my 485?
Also, would you know anything about copies of affidavits?
Pl reply. I am in serious bind.
Thanks.
tattoo Pictures of Heart Tattoos
DianaSteve
12-13 12:02 PM
My I140 is showing up online now.
more...
pictures Old School Tattoos!
amitga
08-27 01:22 PM
Had the visit. Went very pleasant but fruitless. Officer told me all checks except "background" check had been done. Beyond this, she refrained from making any usefull remark.:rolleyes:
BTW: It's a nice big and open facility!
How long you had to wait?
Where is the office located in Detroit?
BTW: It's a nice big and open facility!
How long you had to wait?
Where is the office located in Detroit?
dresses Tattoos of names on one#39;s
morchu
05-29 02:30 PM
1. Yes. Most countries need 6 months validity on passport from the date of entry. Some countries are exempt from this rule.
2. Usually you keep the same I94.
3. Not necessarily. But be prepared to answer questions. If you are unable to prove your intention to be permanently residing in US, upon US GC, that can be an issue.
Basically you have to claim that you have proper intentions now, and at the time of applications of canadian PR and US GC. Also you have to claim that you plan to reside in US permanently if you receive US GC.
Hi,
1. My current passport is valid till September, 2009. Can that be a problem while coming back to the US using AVR (as passport will be expiring in app. 3 months)? Is there any minimum Passport validity period for US POE to enter US?
2. When using AVR, is there a new I-94 issued at the POE or the same previous I-94 is handed over as it is?
3. As I have a pending 485, can the completion of Canadian PR Landing formalities and use of AVR while coming back to US be a problem at the POE or for 485?
Thanks.
2. Usually you keep the same I94.
3. Not necessarily. But be prepared to answer questions. If you are unable to prove your intention to be permanently residing in US, upon US GC, that can be an issue.
Basically you have to claim that you have proper intentions now, and at the time of applications of canadian PR and US GC. Also you have to claim that you plan to reside in US permanently if you receive US GC.
Hi,
1. My current passport is valid till September, 2009. Can that be a problem while coming back to the US using AVR (as passport will be expiring in app. 3 months)? Is there any minimum Passport validity period for US POE to enter US?
2. When using AVR, is there a new I-94 issued at the POE or the same previous I-94 is handed over as it is?
3. As I have a pending 485, can the completion of Canadian PR Landing formalities and use of AVR while coming back to US be a problem at the POE or for 485?
Thanks.
more...
makeup heart tattoos for men. heart
smuggymba
08-18 11:18 PM
^^
agree with above. This forum is to press our genuine demands....not some a**holes news who brings a bad name.
delete this.
agree with above. This forum is to press our genuine demands....not some a**holes news who brings a bad name.
delete this.
girlfriend Trend Heart Tattoos
hpandey
10-06 11:51 AM
Not exactly, http://immigrationvoice.org/forum/showthread.php?t=21871
Bingo !! We would never be lucky enough to get rid of the GCTEST headache :D
Bingo !! We would never be lucky enough to get rid of the GCTEST headache :D
hairstyles Where to Find the Best Tattoos
Openarms
12-05 01:44 PM
Bump
what is this bump means???
what is this bump means???
softa
June 1st, 2006, 04:56 PM
Thanks, your reply really helped me understand a few things. First of all, for the money I can spend there isn't much of a choice (meaning what I already picked is fine for the money spent), then, even more important fact I realized is that the equipment I can afford for now, can be a starting point in my photography experience. It is more important that I use it, take photos and practice than to own expensive gear and never really use it. In the end I hope that one day in the future when I gain the needed skill I'll be able to afford a better and a more advanced equipment. So, once again, thanks a lot.
WaitingUnlimited
06-30 12:51 PM
I got below email from Alberta. It looks like those who have job offer in hand will have their applications processed quickly. This is a recent CHANGE to Alberta H1b program.
Are they just trying to eliminate or atleast not approve the huge amount of applications?:confused:
Did any one get this kind of email?
============================================
AINP US Visa Holder Category Applicants
Priority processing will be given to those who have a job offer from an Alberta Employer.
If you have a job offer from an Alberta employer send us a copy of the offer along with the job description. Click here
A job offer can be your contract or letter of employment from an Alberta employer. The job offer must be in a field related to your current occupation in the US. The document must be on the official letterhead of the Alberta employer you will be working for.
Are they just trying to eliminate or atleast not approve the huge amount of applications?:confused:
Did any one get this kind of email?
============================================
AINP US Visa Holder Category Applicants
Priority processing will be given to those who have a job offer from an Alberta Employer.
If you have a job offer from an Alberta employer send us a copy of the offer along with the job description. Click here
A job offer can be your contract or letter of employment from an Alberta employer. The job offer must be in a field related to your current occupation in the US. The document must be on the official letterhead of the Alberta employer you will be working for.
No comments:
Post a Comment