waw74
Apr 24, 04:14 PM
most TVs don't include an audio in port for the HDMI.
you can use something like
this (http://www.monoprice.com/products/product.asp?c_id=101&cp_id=10114&cs_id=1011405&p_id=5369&seq=1&format=2) - a dvi and digital audio combiner, that outputs HDMI.
and one of these (http://www.monoprice.com/products/subdepartment.asp?c_id=102&cp_id=10229&cs_id=1022902) toslink to mini cable to connect audio from your computer to the box.
and one of these (http://www.monoprice.com/products/product.asp?c_id=102&cp_id=10209&cs_id=1020901&p_id=2685&seq=1&format=2) dvi cables to connect your computer to the box.
you'll also need an HDMI male to male, to plug the box into your TV.
also look at your TV manual, or if you're using an external stereo that has digital inputs. the toslink to mini cable might come in handy.
you can use something like
this (http://www.monoprice.com/products/product.asp?c_id=101&cp_id=10114&cs_id=1011405&p_id=5369&seq=1&format=2) - a dvi and digital audio combiner, that outputs HDMI.
and one of these (http://www.monoprice.com/products/subdepartment.asp?c_id=102&cp_id=10229&cs_id=1022902) toslink to mini cable to connect audio from your computer to the box.
and one of these (http://www.monoprice.com/products/product.asp?c_id=102&cp_id=10209&cs_id=1020901&p_id=2685&seq=1&format=2) dvi cables to connect your computer to the box.
you'll also need an HDMI male to male, to plug the box into your TV.
also look at your TV manual, or if you're using an external stereo that has digital inputs. the toslink to mini cable might come in handy.
Kyffin
Dec 29, 05:36 PM
Its great when hobbies start paying their way...
Multimedia
Oct 9, 12:31 PM
It was reported this morning that it's going to take 2 months for the 12 day west coast dock backlog to get caught up so everything we've been expecting soon may not show up much before MacWorld San Francisco 2003. It just depends where those drives are in the cue.
Even if they haven't been shipped from Japan yet, it's going to take longer for them to arrive because of this huge cue that has built up over these past 12 days. That includes things like the Pioneer DVR-A05 Quad Speed SuperDrive, the Yamaha External FireWire version of the CRW-F1, and the new PowerBooks that Apple has had to delay announcing because they're sitting on a ship that hasn't been able to be unloaded. So I think we're going to have to be extra patient about getting what we know is next.
Let's all remember that this was NOT a STRIKE by the workers but a LOCKOUT by management. Management did not negotiate in good faith and was willing to wait for the President to step in while Bananas and other perishable food rotted on those unserviced ships.
Even if they haven't been shipped from Japan yet, it's going to take longer for them to arrive because of this huge cue that has built up over these past 12 days. That includes things like the Pioneer DVR-A05 Quad Speed SuperDrive, the Yamaha External FireWire version of the CRW-F1, and the new PowerBooks that Apple has had to delay announcing because they're sitting on a ship that hasn't been able to be unloaded. So I think we're going to have to be extra patient about getting what we know is next.
Let's all remember that this was NOT a STRIKE by the workers but a LOCKOUT by management. Management did not negotiate in good faith and was willing to wait for the President to step in while Bananas and other perishable food rotted on those unserviced ships.
Kaulitz
Mar 25, 03:19 AM
How long is the queue at the moment?
more...
GGJstudios
May 4, 12:09 AM
Look up MAC Defender.
That has nothing to do with Mac security. It's not even malware. It's only an app install package that the user can cancel with zero effect on their system.
That has nothing to do with Mac security. It's not even malware. It's only an app install package that the user can cancel with zero effect on their system.
dstopsky
Dec 5, 05:34 AM
If it's not a Dreamweaver template (which I'm 99% sure it is) then it is simply a Macromedia.com rip-off (in terms of design).
Still, nicely done :)
Yes, you are right, it is a dreamweaver template. I'm working right now on a new layout but I wanted to get the site up and running again so I took the quick and easy route in the meantime. Either way, I think macromedia's design is a great starter.
Still, nicely done :)
Yes, you are right, it is a dreamweaver template. I'm working right now on a new layout but I wanted to get the site up and running again so I took the quick and easy route in the meantime. Either way, I think macromedia's design is a great starter.
more...
jondob
May 4, 09:51 PM
I just went to put another cd in and it wont take the cd at all.... It seems to reset itself when I restart though, but then only works once before it stops working...
Is there anything I can do here?
Is there anything I can do here?
Isoparm
Mar 9, 12:30 PM
No, see that's the problem. I can't figure out how to forward request to IP #2 to the server on the alternate ports.
It always goes to the server on port 80 (apache).
What I need to figure out is how to get the request on that 2nd IP to forward to the alternate ports (where the ruby server is running).
It always goes to the server on port 80 (apache).
What I need to figure out is how to get the request on that 2nd IP to forward to the alternate ports (where the ruby server is running).
more...
chstr
Oct 1, 08:13 PM
the above meant Andres Segovia. also Julian Bream and John Williams are great classical players. Paco Pena and Paco DeLucia are great flamenco artists. Try Pierre Bensusan for fingerstyle stuff
rdowns
Mar 15, 06:05 AM
If only others had thought of that. :rolleyes:
http://forums.macrumors.com/showthread.php?t=1106065&highlight=march+desktops
http://forums.macrumors.com/showthread.php?t=1106065&highlight=march+desktops
more...
zdobson
Apr 19, 12:44 PM
Now this is looking different. I'm not sure why this would have changed. The finder windows are clear.
http://www.zachdobson.com/temp/screen2.png
Also, the CPU keeps running between 30-90% even though there are no applications running (other than activity monitor). Related or no?
http://www.zachdobson.com/temp/screen2.png
Also, the CPU keeps running between 30-90% even though there are no applications running (other than activity monitor). Related or no?
vincenz
Feb 1, 04:19 PM
The screen looks closer to 4:3 ratio than 16:9.
more...
phungy
Jun 24, 08:57 PM
i dont see his
Post #4 (http://forums.macrumors.com/showpost.php?p=5650241&postcount=4)
Post #4 (http://forums.macrumors.com/showpost.php?p=5650241&postcount=4)
fatboyfootball
Apr 28, 05:40 AM
I think a blue or pink one would be great!! Maybe Apple will have a "rainbow" collection of colors? That would be so much fun!!
more...
madog
Feb 16, 12:33 AM
Everything ran smoothly for the... ohhh 4-5 years I've had Mac OS X. Then, one day a couple of weeks ago [using 10.3.7], my internet magically "shuts down" while my computer is on [this is the only pretext to my finder problem]. Nothing I could do could restart the internet: power cycling the modem/router, creating new connection settings, whatever. So then, I decided to restart. This is when my Finder hung at startup. Soooo, I let it sit there for a while and after about 5 min of not touching anything [not trying to relaunch Finder] it will startup. However, if the Finder hangs [for me] at startup, the internet will not work at all. Soooo crap.
So I went through my basic troubleshooting scheme, rebooting from a CD and running the likes of DiskWarrior, TechTool4 and DiskUtility. The first time I did this, everything went back to normal. However, after another 12 hours of the computer being on, the internet mysteriously cut out again, so I knew the Finder would hang if I rebooted [which it did]. So I did what I had done before but this time nothing worked. Soooo I tried a combo power-cycling modem/router-while-booted-from-cd-and-running-repairs thing and it worked. So I went along my merry way and it happened again. This time after about 24 hours.
So then I boot up from my Panther disk to run repairs from there. This time, I only have my modem unplugged [in all/any way it can be unplugged] and upon restart it worked fine. Good. Great. Dandy.
Then after another unknown amount of hours [2 days or so] it happens [i]again. Sigh.....
"OK, screw this", I thought. I'll just reinstall and everything will be OK. So I boot from my Panther disk, zero my boot drive and reformat to Journaling ["Fine, if Mac OS X would rather have journaling then it might make my life easier"]. I reinstall only the BSD Subsystem as an option so I only have to use 1 disk. Then I go about re-customizing my OS to my liking, adding this time only LittleSnitch, MenuMeters and TransperantDock [as opposed to all the crap I had on before, with around 10 "other" system preference panes and a "full" Applications folder]. Then after another 48 hours the system craps out. Just long enough after I had everything to my liking.
"ARGH!"
So I go about reinstalling again, this time from a friends Panther disk, just to make sure. Instead of zeroing the drive again, I just erase and reinstall. Upon the very first restart, the Finder hung........ "Dear Mac Gods......"
So the next time, I try zeroing AND "8-way random write" to my drive just to make sure everything is nice and clear before I start again. Oh, by the way, did you know it takes around 13 hours to 8-way random write to a 30gb hard drive? Anyway, this time I get it started after and immediately [as I usually do] run permission repair and then update my OS. Then after reboot, I repair permissions again and proceed to get more updates. Oh, and at this time I had been recieving weird permission problems such as:
User differs on ., should be 0, owner is 501
Permissions differ on ., should be drwxrwxr-t , they are drwxrwxr-x
Owner and group corrected on .
Permissions corrected on .
and
Permissions differ on ./private/etc/slpsa.conf, should be -rwxr-xr-x , they are -rw-r--r--
Owner and group corrected on ./private/etc/slpsa.conf
Permissions corrected on ./private/etc/slpsa.conf
I repair my permissions regularly and have never seen either of those before.
Let's see.... where was I.... oh, 3rd reinstall I think.
Ok, so I continue to update my system [this install was when 10.3.8 came out, before the full combo update] and get it to 10.3.8. I happily chug along thinking 10.3.8 was a god send, and go forth and install LittleSnitch and MenuMeters [two things I can't live without] directly from the developer sites. Then the problem happens AGAIN after another 24 hours or so of no restart after installing LS.
So now I'm really angry. I search Apple's boards and google the problem to find that it's happened to more than a few people. They have suggestions such as to reset pram, delete user and system caches and delete certain user/system preferences. "How could I have a corrupt cache or pref on a fresh install?", I think. So I reboot and let the system hang until it finally boots up [but with no internet access] and I enable invisible items and proceed to trash all my caches [only this so far]. Since some are still in use, I have to reboot to empty the trash. So I do so. The Finder hangs the next start up, but I figure that's just a warmup for the files I just deleted. So I restart again. Finder still hangs. Luckily I had to leave at this point, so I keep my system running, getting ready to rein
Keshia Knight-Pulliam has
more...
Re: The Keisha Knight quot;Rudyquot;
Photo of Keshia Knight Pulliam
Keshia Knight Pulliam Pictures
So I went through my basic troubleshooting scheme, rebooting from a CD and running the likes of DiskWarrior, TechTool4 and DiskUtility. The first time I did this, everything went back to normal. However, after another 12 hours of the computer being on, the internet mysteriously cut out again, so I knew the Finder would hang if I rebooted [which it did]. So I did what I had done before but this time nothing worked. Soooo I tried a combo power-cycling modem/router-while-booted-from-cd-and-running-repairs thing and it worked. So I went along my merry way and it happened again. This time after about 24 hours.
So then I boot up from my Panther disk to run repairs from there. This time, I only have my modem unplugged [in all/any way it can be unplugged] and upon restart it worked fine. Good. Great. Dandy.
Then after another unknown amount of hours [2 days or so] it happens [i]again. Sigh.....
"OK, screw this", I thought. I'll just reinstall and everything will be OK. So I boot from my Panther disk, zero my boot drive and reformat to Journaling ["Fine, if Mac OS X would rather have journaling then it might make my life easier"]. I reinstall only the BSD Subsystem as an option so I only have to use 1 disk. Then I go about re-customizing my OS to my liking, adding this time only LittleSnitch, MenuMeters and TransperantDock [as opposed to all the crap I had on before, with around 10 "other" system preference panes and a "full" Applications folder]. Then after another 48 hours the system craps out. Just long enough after I had everything to my liking.
"ARGH!"
So I go about reinstalling again, this time from a friends Panther disk, just to make sure. Instead of zeroing the drive again, I just erase and reinstall. Upon the very first restart, the Finder hung........ "Dear Mac Gods......"
So the next time, I try zeroing AND "8-way random write" to my drive just to make sure everything is nice and clear before I start again. Oh, by the way, did you know it takes around 13 hours to 8-way random write to a 30gb hard drive? Anyway, this time I get it started after and immediately [as I usually do] run permission repair and then update my OS. Then after reboot, I repair permissions again and proceed to get more updates. Oh, and at this time I had been recieving weird permission problems such as:
User differs on ., should be 0, owner is 501
Permissions differ on ., should be drwxrwxr-t , they are drwxrwxr-x
Owner and group corrected on .
Permissions corrected on .
and
Permissions differ on ./private/etc/slpsa.conf, should be -rwxr-xr-x , they are -rw-r--r--
Owner and group corrected on ./private/etc/slpsa.conf
Permissions corrected on ./private/etc/slpsa.conf
I repair my permissions regularly and have never seen either of those before.
Let's see.... where was I.... oh, 3rd reinstall I think.
Ok, so I continue to update my system [this install was when 10.3.8 came out, before the full combo update] and get it to 10.3.8. I happily chug along thinking 10.3.8 was a god send, and go forth and install LittleSnitch and MenuMeters [two things I can't live without] directly from the developer sites. Then the problem happens AGAIN after another 24 hours or so of no restart after installing LS.
So now I'm really angry. I search Apple's boards and google the problem to find that it's happened to more than a few people. They have suggestions such as to reset pram, delete user and system caches and delete certain user/system preferences. "How could I have a corrupt cache or pref on a fresh install?", I think. So I reboot and let the system hang until it finally boots up [but with no internet access] and I enable invisible items and proceed to trash all my caches [only this so far]. Since some are still in use, I have to reboot to empty the trash. So I do so. The Finder hangs the next start up, but I figure that's just a warmup for the files I just deleted. So I restart again. Finder still hangs. Luckily I had to leave at this point, so I keep my system running, getting ready to rein
iLucas
Apr 7, 02:16 PM
3rd cd down might be what you're looking on this site (http://yourmacstore.com/shop/shopdisplayproducts.asp?id=88&cat=Software)
more...
risc
Sep 24, 10:31 PM
Ps. Does anybody know my real name?
Neo?
Neo?
bobsaget
Apr 7, 01:10 PM
http://stephentenuto.com
Any criticism very much appreciated!
Thanks for watching!
Any criticism very much appreciated!
Thanks for watching!
MrWinters
May 4, 11:17 AM
I just got my hands on a Power Mac G5. I got it off a guy for $150!! Let me say, it's an incredible machine. Dual 2.5 G5's with 2Gig of RAM. I installed 10.5.8 on it.
This machine blows both my 2009 13" Macbook and 2008 Mini out of the water when it comes to speed and smoothness. As is it, FCP runs so much better than my Intel Macs that I am in total Awww of it... (can u tell I'm excited about this 6 year old computer :) )
Since I got it so cheap, I want to upgrade the hell out of it and use it as my primary machine (age of it be damned). I want to expand the RAM fully to 16 GB, put a fast 2 GB HDD in, and get the best possible Video card available.
I have 2 questions:
1. What is the best GPU available for this machine??
2. What is everyone's opinion to the possibility that after I get this thing where I want it, Apple will drop support for Leopard and I will no longer be able to sync my iPhone, iPad, or iPods to it. I of course, Plan to keep my Intel Macs running on the other end of the room (along with my "necessary" PC) but since I sit in THIS chair in my office most of the time, it would be nice to do everything from right here...
I know you don't hear many people wanting to make an older machine their primary computer, but this thing is really a monster...
Any thoughts???? Thanks in Advance.
Al Winters
This machine blows both my 2009 13" Macbook and 2008 Mini out of the water when it comes to speed and smoothness. As is it, FCP runs so much better than my Intel Macs that I am in total Awww of it... (can u tell I'm excited about this 6 year old computer :) )
Since I got it so cheap, I want to upgrade the hell out of it and use it as my primary machine (age of it be damned). I want to expand the RAM fully to 16 GB, put a fast 2 GB HDD in, and get the best possible Video card available.
I have 2 questions:
1. What is the best GPU available for this machine??
2. What is everyone's opinion to the possibility that after I get this thing where I want it, Apple will drop support for Leopard and I will no longer be able to sync my iPhone, iPad, or iPods to it. I of course, Plan to keep my Intel Macs running on the other end of the room (along with my "necessary" PC) but since I sit in THIS chair in my office most of the time, it would be nice to do everything from right here...
I know you don't hear many people wanting to make an older machine their primary computer, but this thing is really a monster...
Any thoughts???? Thanks in Advance.
Al Winters
madmaxmedia
Jan 29, 04:46 PM
Darnit. I want to do this too, but I no longer have the Windows machines, only a 20-some megabyte outlook.pst file.
If you need help, PM me. I don't know how confidential your Outlook data is, but I could do quick export for you.
If you need help, PM me. I don't know how confidential your Outlook data is, but I could do quick export for you.
harpster
Apr 1, 05:25 AM
I mean when clicking on the input box instead of it focusing on the input box for text entry, it instead focuses on the submit button.
While ie6 is not my target platform since the site worked so far without any alterations i don't mind supporting it.
IE6 is not very forgiving. If it works in Firefox then you most likely have html error(s)... things like missing close brackets /> and table cell <td></td> can effect that in IE6 where other browsers assume it's there and will still work. Have you tried and html validator?
While ie6 is not my target platform since the site worked so far without any alterations i don't mind supporting it.
IE6 is not very forgiving. If it works in Firefox then you most likely have html error(s)... things like missing close brackets /> and table cell <td></td> can effect that in IE6 where other browsers assume it's there and will still work. Have you tried and html validator?
Danno21
Apr 22, 12:18 AM
I was actually just going to ask pretty much the same question and am interested as well.
What I wanted to do was put Windows 7 along with OSX on my 240gb SSD while also partitioning my my 750gb HDD that I'll install in the optibay drive so one side is for Windows in NTFS and the other for OSX.
Possible within disc utilies, right? Sorry, I am a new Mac user =D
What I wanted to do was put Windows 7 along with OSX on my 240gb SSD while also partitioning my my 750gb HDD that I'll install in the optibay drive so one side is for Windows in NTFS and the other for OSX.
Possible within disc utilies, right? Sorry, I am a new Mac user =D
infernohellion
Mar 13, 09:34 PM
Very interesting..
"Dropbox" -vs- "Drop Box"
"Dropbox" -vs- "Drop Box"
terraphantm
Apr 30, 02:23 PM
I fail to see the need to preserve a baseband that can't be unlocked.
The team isn't going to waste their time working on 3.10 when they can just work on the most recent, or put serious effort into whatever comes with 5.0.
Then they'd just have everyone update to 5.0.
There is the off chance that they'll find a crash in one of the older basebands that was inadvertently fixed in the newer basebands. But I agree in that it probably isn't worth preserving since there's an equal chance that one of the newer basebands will have a crash that wasn't available in an older one... and w/ the iPhone 4 you can only install whatever baseband is being signed at that moment, so preserving a baseband might actually screw one's unlock chances too.
Hopefully they can figure out the NCK Unlock stuff since that'd be just as good as an official unlock. If the key truly is 40-bits, it shouldn't be that hard to brute force. Everything has been kinda quiet lately though, so who knows what's going on behind the scenes. They might even be saving it for the iPhone 5 release
The team isn't going to waste their time working on 3.10 when they can just work on the most recent, or put serious effort into whatever comes with 5.0.
Then they'd just have everyone update to 5.0.
There is the off chance that they'll find a crash in one of the older basebands that was inadvertently fixed in the newer basebands. But I agree in that it probably isn't worth preserving since there's an equal chance that one of the newer basebands will have a crash that wasn't available in an older one... and w/ the iPhone 4 you can only install whatever baseband is being signed at that moment, so preserving a baseband might actually screw one's unlock chances too.
Hopefully they can figure out the NCK Unlock stuff since that'd be just as good as an official unlock. If the key truly is 40-bits, it shouldn't be that hard to brute force. Everything has been kinda quiet lately though, so who knows what's going on behind the scenes. They might even be saving it for the iPhone 5 release
No comments:
Post a Comment